1.28.3 Walking ExtensionDescriptionIt is possible to use any extension and have your extension settings available to you. Settings such as extensionnumber, one-touch dialling memory, and COS are all available to you at the new location. This feature is alsoknown as Walking Station.[Example] This feature is useful when:• Moving location• There is no specific desk for your use.Conditions• This feature allows extension settings to be switched between PTs (including IP-PTs) and SLTs. Movingbetween tenants is also possible.• Incoming calls to your extension will also reach you at your new location.• An extension personal identification number (PIN) is required to use this feature. (® 1.28.1 ExtensionPersonal Identification Number (PIN))• If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after WalkingExtension has been activated, the new extension number of the PT must be assigned as the pairedextension through system programming.• If PC programming is being performed for extensions whose extension settings are being transferred bythe Walking Extension feature, the Walking Extension feature may not work properly (® 2.3.1 PCProgramming).• If this feature is performed using an extension with a Bluetooth wireless headset connected, the Bluetoothdevice cannot be used with the new extension. To use the Bluetooth wireless headset, register it to thenew extension.PT Programming Manual References[007] DSS Console Paired TelephoneFeature Guide References1.31.1 IP Proprietary Telephone (IP-PT)User Manual References1.12.1 Using the Same Settings as Your Previous Extension (Walking Extension)Feature Guide 2731.28.3 Walking Extension
