The FWD/DND status for trunk calls to that extension can be switched temporarily without clearing theFWD destination. During setting, the LED of the button shows the current trunk call FWD/DND status. Theforwarding type and destination for trunk calls can also be set.• FWD/DND for intercom callsThe FWD/DND status for intercom calls to that extension can be switched temporarily without clearing theFWD destination. During setting, the LED of the button shows the current intercom call FWD/DND status.The forwarding type and destination for intercom calls can also be set.• FWD—No Answer timerThe length of time until unanswered calls are forwarded can be modified. This setting is applied to bothintercom and trunk call forwarding.• FWD for Virtual PSIf the extension is the first registered extension in an Incoming Call Distribution Group, the extension usercan set the FWD destination and forwarding status (on/off) for up to 4 virtual PSs preregistered to the group.(® 1.25.6 Virtual PS)These settings are only available when FWD/DND buttons are set through system programming to FWD/DNDSetting mode.Conditions• When FWD/DND buttons are set to FWD/DND Cycle Switch mode, pressing the FWD/DND button cyclesthe FWD/DND setting.In this mode, when intercom calls are set to be handled differently from trunk calls (forwarding type, forwarddestination, DND on/off):a. in idle mode, the light patterns of the FWD/DND—Both button (including FWD/DND button [fixedbutton]) and the Group FWD—Both button will indicate the setting for either trunk calls or intercomcalls, but not both.b. the FWD and DND icons on a PS display reflect the settings for trunk calls only.c. pressing the FWD/DND—Both button (including FWD/DND button [fixed button]) or the Group FWD—Both button will be ignored.• When both the FWD and DND features are assigned simultaneously, pressing the button changes thesettings as follows:FWD DND Off• A FWD/DND button customised on a flexible button is always in FWD/DND Cycle Switch mode, and themode cannot be changed.Feature Guide References1.20.1 Fixed Buttons1.20.2 Flexible ButtonsUser Manual References3.1.2 Settings on the Programming Mode68 Feature Guide1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)
