1.1.3.2 Ring Tone Pattern SelectionDescriptionIt is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,etc.[Ring Tone Patterns]1 280 ms*SingleDoubleTripleS-Double* The duration of a ring tone may vary by country/area.[Ring Tone Pattern Table]The ring tone pattern table is categorised into three parts, each containing a specified number of pattern plans.The ring tone pattern table is categorised as follows:• Incoming Trunk Calls: each pattern plan can assign a ring tone pattern for each trunk group.• Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.• Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tonesassigned to certain features (e.g., timed reminder).The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to thatextension through system programming.[Programming Example of Ring Tone Pattern Table]TableNo.IntercomCall/HoldRecallTrunk Call/HoldRecall Doorphone Call TimedReminderCallBack LCS ExternalSensorTRG1 TRG2 ... Port 1 Port2 ...1 Double Single Single2 Single Double Double: : : : : : : : : : : :Conditions• "PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT userscannot turn incoming call ringing off for their extension.• For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can beassigned through personal programming.Feature Guide 351.1.3 Incoming Call Indication Features
