The following features can be set in each time mode (day/lunch/break/night):a. Destination of incoming trunk calls (DIL/DID/DDI/MSN) (® 1.1.1 Incoming Trunk Call Features)b. Destination of the Intercept Routing (® 1.1.1.6 Intercept Routing)c. Queuing Time Table for incoming call distribution groups (® 1.2.2.4 Queuing Feature)d. Overflow destination for incoming call distribution groups (® 1.2.2.6 Overflow Feature)e. Destination of incoming doorphone calls (® 1.17.1 Doorphone Call)f. PBX operator (® 2.2.5 Operator Features)g. COS for TRS/Barring and for Trunk Accessh. Outgoing Message (OGM) for Timed Reminder (® 1.28.4 Timed Reminder)i. Intercept time for Intercept Routing—No Answer (® 1.1.1.6 Intercept Routing) and for DISA InterceptRouting—No Answer (® 1.17.6 Direct Inward System Access (DISA))[Programming Examples of DID/DDI Table and DIL Table]DID/DDI table can be programmed for each DID/DDI number, and a tenant (Time Table) number isassigned to each DID/DDI number. DIL table can be programmed for each trunk, and a tenant (Time Table)number is assigned to each trunk.Location DID/DDI No. Tenant(Time Table)No.DID/DDI DestinationDay Lunch Break Night001 123-4567 1 105 100(VPS)105 100(VPS)002 123-2468 1 102 100(VPS)102 100(VPS): : : : : : :Trunk No. Tenant (Time Table) No. DIL DestinationDay Lunch Break Night01 1 101 100(VPS)101 100(VPS)02 2 102 100(VPS)102 100(VPS): : : : : :Explanation:If a trunk call with a DID number (123-4567) is received at 20:00;1. Tenant (Time Table) number 1 will be used.2. The call is received during night mode in Time Table 1.3. The call will be routed to the extension 100 (VPS).4. Holiday ModeThe holiday mode activates automatically using the Automatic Switching mode. Up to 24 holidays (startand end dates) can be stored, and one time mode can be selected for all holidays.5. Time Service ButtonA flexible button can be customised as the following buttons:340 Feature Guide2.2.4 Time Service
