– KX-TCA355– KX-TD7680– KX-TD7684– KX-TD7694• Incoming trunk call information is shown on a PS display when a trunk call arrives at a PS ring group whichthe PS joins. The display information can be selected on a PS ring group basis through systemprogramming: Called Party’s Name/Number or Caller’s Name/Number.• Calling Multiple PSs SimultaneouslyThere are two methods to call multiple PSs simultaneously using the floating extension number assignedto the following groups:Method Assignment Merit DemeritIncoming CallDistribution GroupAssign all desired PSs toone incoming calldistribution group, and setthe group call distributionmethod for the group to"Ring".® 1.2.2 Incoming CallDistribution Group FeaturesAll PS users in thegroup can use theLog-in/Log-outfeature, Wrap-upfeature, and ICDGroup button for thegroup.The CS may often bebusy as each PS inthe group uses onechannel when a callarrives at the group.PS Ring Group Assign all desired PSs toone PS ring group.Only one channel isused when a callarrives at the group.PS users in the groupcannot use theLog-in/Log-out andWrap-up features.• When a PS joins a PS ring group, the following personal settings are disregarded:a. When the PS ring group is called:– Delayed Ringing– Display information when the incoming calls arrive;The settings (e.g., display priority) are disregarded.– The setting which is assigned on the PS (e.g., FWD)– The status of the PS (e.g., busy)b. Log-in/log-out setting (from the PS ring group/from the incoming call distribution group which the PSring group belongs to). (® 1.2.2.7 Log-in/Log-out)NoteLog-in/log-out setting of the PS ring group from the incoming call distribution group is also disregarded.PS Ring GroupLog-outLog-inFeature Guide 2471.25.2 PS Ring Group
