Location No. NameCLI DestinationDay Lunch ... Day Lunch ...01 123-4567ACompany Enable Disable ... 101 100 ...02 123-2468CCompany Enable Disable ... 102 100 ...: : : : : : : : :10 : : : : : : : :NoteTenant number and VM trunk group number can also be assigned in the MSN table. Tenant number isused to determine the time mode (day/lunch/break/night) for the corresponding MSN. VM trunk groupnumber is used in Voice Mail DPT (Digital) Integration.® 1.24.3 Voice Mail DPT (Digital) IntegrationExplanation:If the MSN "123-4567" is received from BRI port 1:1. Checks the number in the table.® Matches the number in location 01.2. Checks the time mode.In Day mode: CLI is enabled. Route to CLI destination.In Lunch mode: CLI is disabled. Route to MSN destination, extension 100.Conditions• To use this feature, the MSN service must be assigned as the distribution method for a trunk port.• MSN ModificationIt is possible to modify a received MSN to make it shorter, which may be convenient when programmingthe MSN table. The modification method (removed number of digits/added number) can be programmedon a trunk port basis.[Modification Example]Removed number of digits: 6Added number: 10Received MSN: 87654321Modified MSN: 876543 21 = 10211) Remove the first6 digits.2) Add "10".• When using point-to-multipoint configuration with a BRI, do not connect another ISDN terminal device inparallel with the PBX. As only two channels can be used at one time with the BRI, the other ISDN terminaldevice may monopolise both channels.PT Programming Manual References[421] BRI DIL/DDI/MSN Selection[426] BRI ConfigurationFeature Guide 231.1.1 Incoming Trunk Call Features
