When storing the number and name into Personal Speed Dialling from the call log information, the IdleLine Access number is automatically attached to the telephone number.• Incoming Call Log MemoryThe total memory for the Incoming Call Log is determined in the PBX. The maximum number that can belogged for each extension and incoming call distribution group is also determined through systemprogramming. If the memory becomes full, the new call record overwrites the oldest one.• Call Log for Incoming Call Distribution Group CallsIf the original destination of a call is an incoming call distribution group, and the call is not answered, theinformation is logged in the call log for the group. If it is answered, the information is logged in the call logfor the answering extension.Through system programming, it is possible to select which Incoming Call Logs record call informationwhen a member of an incoming call distribution group answers a call to the group:– Only the Incoming Call Log of the extension that answered the call.– Both the Incoming Call Log of the extension that answered the call and that of the incoming calldistribution group.Feature Guide References1.6.1.5 Speed Dialling—Personal/System1.20.2 Flexible Buttons3.1 Capacity of System ResourcesUser Manual References1.13.1 Using the Call Log3.1.2 Settings on the Programming Mode192 Feature Guide1.18.2 Incoming Call Log
