Panasonic KX-TDA100D Features Manual

Also see for KX-TDA100D: Programming manual User manual Installation guide Features guide Programming manual

Contents

Panasonic KX-TDA100D Features Manual Manual pdf 143 page image

1.11.10 Calling Party Control (CPC) Signal DetectionDescriptionThe Calling Party Control (CPC) signal is an on-hook indication (disconnect signal) sent from the analoguetrunk when the other party hangs up. To maintain efficient utilisation of trunks, the PBX monitors their stateand when CPC signal is detected from a line, disconnects the line and alerts the extension with a reorder tone.Conditions• CPC signal detection is programmable for incoming trunk calls, and for outgoing trunk calls.• If your telephone company sends other signals similar to CPC, it is recommended not to enable CPC signaldetection on outgoing trunk calls.• If a CPC signal is detected during a Conference call (® 1.14.1.2 Conference), that line is disconnected,but the remaining parties stay connected.• If a CPC signal is detected during a call between a caller using the DISA feature (® 1.17.6 Direct InwardSystem Access (DISA)) and an extension or an outside party, the line is disconnected.PT Programming Manual References[413] LCOT CPC Signal Detection Time—Outgoing[414] LCOT CPC Signal Detection Time—IncomingFeature Guide 1431.11.10 Calling Party Control (CPC) Signal Detection