1.6 Memory Dialing FeaturesFeature Guide 61[Example]When storing the number "9-123-456-7890", to conceal the telephone number "123-456-7890",Notes• It is possible to store a Memory Dialing feature number at the beginning ofMemory Dialing numbers.• It is possible to store several feature numbers in one Memory Dialing location.Conditions• CO Line Access by Memory DialingA specific CO Line Access number can be stored along with the telephone number inMemory Dialing. However, if Memory Dialing is done after selecting a CO line, the storedCO Line Access number is ignored and the telephone number is sent using the selectedCO line.1.6.1.2 One-touch DialingDescriptionA proprietary telephone (PT) user can make a call or access a feature with a one-touchoperation. This is possible by storing the number, such as an extension number, telephonenumber, or feature number, in a One-touch Dialing button.PAUSE (Pause) P Store a dialing pause by pressing the PAUSEbutton. ( 1.5.4.5 Pause Insertion)FLASH/RECALL(Hooking)*F Store a flash/recall signal (EFA mode) bypressing the FLASH/RECALL button at thebeginning of the number. ( 1.10.6 ExternalFeature Access (EFA))INTERCOM(Secret)*[/] Conceal all or part of the number by pressing theINTERCOM button at the beginning and at theend of the number to be concealed. It isprogrammable whether the concealed part will beshown on the SMDR ( 1.21.1 Station MessageDetail Recording (SMDR)).TRANSFER(Transfer)*T Store a transfer command by pressing theTRANSFER button at the beginning of thenumber (used only for One-touch Dialing). (1.11.1 Call Transfer)[Example] Storing "T + 305"= Transferring a callto extension 305.* Available only when in the system/personal programming modeInput Displayedwhile Entering DescriptionEnter .INTERCOM9 1 2 3 4 5 6 7 8 9 0 INTERCOM
