4.1 Configuration [1]248 Feature GuideDeleteAssigns the card type to be deleted from the slot.4.1.7 Portable Station [1-2]Various portable station (PS) settings can be programmed. A maximum of 28 PS can beregistered.PS Registration and De-registrationA PS must be registered to the PBX by programming both the PBX and PS before it can beused. Programming instructions of the PBX are given below; programming instructions of thePS are found in the Installation Manual.If desired, it is possible to de-register the PS later on.RegistrationFollow the steps below to register the PS.1. Specify the extension number of the PS, and then click Apply.2. Select the PS by clicking the Select cell and set it to ON.More than one PS can be selected at a time (only the unregistered PS with anextension number can be selected).3. Click Registration.A dialog box will appear when the registration starts to execute.4. While the registration is executing, program the PS referring to "2.7.7 Connecting aCell Station to the PBX" of the Installation Manual.5. Click Confirm.• If the registration is still in the process, the dialog box will show "Waiting: PSRegistration". Click Close.• If the registration is successful, the dialog box will show "Registration Succeed".If there are more PSs to be registered, click Continue to resume or Quit toterminate the registration. If not, click Close.• If the registration is unsuccessful, the dialog box will show "Registration Error".Click Close. The registration will be terminated.Feature Guide ReferencesFeature References• NoneProgramming References• 4.1.1 Slot [1-1]Default Not applicable.Value Range Not applicable.Feature Guide ReferencesFeature References• NoneProgramming References• 4.1.1 Slot [1-1]
