1.20 Portable Station (PS) FeaturesFeature Guide 151If an extension number is required when changing any PS settings while in Wireless XDPParallel mode, use the original extension number assigned to the PS, not the extensionnumber of the paired (wired) telephone.• If the Extension Feature Clear is performed, the corresponding extension data for both thewired telephone and the PS will be cleared. ( 1.22.2 Extension Feature Clear)• When a call arrives, both the wired telephone and the PS will ring. However, when one ofthe following settings is made, only the telephone which was used to make the setting willring.Feature Guide References1.7.1 Automatic Callback Busy (Camp-on)1.7.2 Executive Busy Override1.11.1 Call Transfer1.12.2 Call ParkUser Manual ReferencesUser Manual1.7.8 Wireless XDP Parallel Mode1.20.4 PS DirectoryDescriptionA portable station (PS) user can make a call or access PBX features using information storedin the PS and PBX.Refer to the Operating Instructions supplied with your PS for available directories and usage.– Automatic Callback Busy– Transfer Recall– Hold Recall ( 1.12.1 Call Hold)– Call Park RecallDirectory Type Description ProgrammingPS DialingDirectoryA list of names and telephone numbers. Used tomake a call to one of the stored parties.Stored in the PS bythe PS user.Quick Dialing A list of frequently dialed feature numbers as wellas names and telephone numbers. Used to quicklyaccess one of the stored features, or quickly makea call to one of the stored parties.Stored in the PS bythe PS user.System SpeedDialingDirectoryA system-wide list of names and telephonenumbers. Used to make a call to one of the storedparties.Stored in the PBX.( System SpeedDialing Number[001], SystemSpeed Dialing Name[002])
