2.3 System Data Control194 Feature GuideUser Manual ReferencesUser Manual4.2.1 Feature Number Table2.3.6 Floating ExtensionDescriptionVirtual extension numbers can be assigned to resources to make them as easily accessible asextensions.These numbers are referred to as "floating extension numbers" and can be assigned as adestination of incoming calls, intercepted calls, etc.This feature is also known as Floating Station.Conditions• Certain resources which are assigned a floating extension number can also be assigneda name ( ICD Group Name [623], Outgoing Message (OGM) Name [731]).Feature Guide References1.19.1 Voice Mail (VM) Group2.3.1 PC Programming– Timed ReminderResource DescriptionDevice External Pager Used as the destination for the Trunk Answer From AnyStation (TAFAS) feature ( External Pager FloatingExtension Number [700]). ( 1.15.3 Trunk Answer FromAny Station (TAFAS))Outgoing Message(OGM)Used to play messages for callers via the Direct InwardSystem Access (DISA) feature ( Outgoing Message(OGM) Floating Extension Number [730]). ( 1.15.6Direct Inward System Access (DISA))Analog RemoteMaintenanceUsed to access PC programming mode through a modemon a PC ( Modem Floating Extension Number [811]).Group Incoming CallDistribution (ICD)GroupUsed to call an ICD group ( ICD Group FloatingExtension Number [622]). ( 1.2.2.1 Incoming CallDistribution (ICD) Group Features—OVERVIEW)PS Ring Group Used to call a PS ring group. ( 1.20.2 PS Ring Group)VM (DPT) Group Used to call a VM (DPT) group ( VM Group FloatingExtension Number [660]).VM (DTMF) Group Used to call a VM (DTMF) group.
