Installing Windows Server 2003 x64 Editions D-13DRIVER INSTALLATION AND ADVANCED SETTINGSThis section describes on how to install and setup various standard drivers mounted on the device.For the information on installing and setting up the driver that is not described in this section, pleaserefer to the document attached to the driver.PROSetPROSet is a utility that confirms the function of network contained in network driver.Utilizing PROSet enables the following items: Confirm detailed information of the adapter. Diagnose loop back test, packet transmission test and so on. Setup of teaming.Configuring several network adapters as one team provides the server a tolerant environment on anytrouble and enhances throughput between the switches.PROSet is necessary to utilize these features.Follow the procedure below to install PROSet.1. Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.2. The [Windows Explorer] dialog starts.* The procedure in the case of the standard start menuClick Start menu and click [Windows Explorer].* The procedure in the case of the classic start menuClick Start menu, point to [Programs], [Accessories] and click [Windows Explorer].3. Run "DXSETUP.EXE" in the following directory.DVD-ROM Drive Letter:\WINNT\W2K3AMD\NS4\PROSET\WS3XPX64The [Intel® PROSet - InstallShield Wizard] dialog starts.4. Click [Next].5. Choose "I accept the terms in the license agreement" and click [Next].6. Choose "Complete" and click [Next].7. Click [Install].8. When [InstallShield Wizard Completed] window is displayed, click [Finish].9. Restart the system.
