8-10 TroubleshootingError Messages on Virtual LCDNEC EXPRESSSCOPE Engine (Remote Management Controller) on your server board allows youto monitor the server status on the WEB browser-based screen of the client PC via network.The virtual LCD (16 digits x 2 lines) in the "Host Information" area displays the POST codes andstatus message.When POST detects an error, the POST error code is displayed on the virtual LCD upon completionof POST. See the table for POST error codes for details.POWER ONATTENTIONVirtual LCD Status indicatorsMessage send from BIOSMessage send from BMCExample:Messages displayed on upper line (BIOS message)On-screen message Description ActionXX BIOS Rev YYYY POST in progress.XX: POST code, YYYY: BIOS versionThis is not an error.CPU Reconfigured POST completes with processordegraded.Contact your servicerepresentative.Try the following steps to cancelthe error.1. Start BIOS SETUP.2. Select [Main] - ProcessorSettings] - [Processor Retest]- [Yes].3. Select [Exit] - [Exit SavingChanges].Mem Reconfigured POST completes with memorydegraded.Contact your servicerepresentative.Try the following steps to cancelthe error.1. Start BIOS SETUP.2. Select [Advanced] - [MemoryConfiguration] - [MemoryRetest] - [Yes].3. Select [Exit] - [Exit SavingChanges].
