6-14 Installing and Using UtilitiesCONFIGURATION DISKETTE CREATOR"Configuration Diskette Creator" is a tool to create [Configuration Diskette] that is used forconfiguring the server with the Express Setup (see Chapter 5 for details).If you use the Configuration Diskette created by the Express Setup and Configuration DisketteCreator to operate the setup, you can setup from the installation of OS to several utilitiesautomatically except for a few key input to confirm the specification. Also, you can install thesystem with the same specification as before when re-installing the system. We recommend you tocreate [Configuration Diskette] to setup the servers from NEC EXPRESSBUILDER.IMPORTANT: You can not create [Configuration Diskette] forMicrosoft Windows Server 2003 x64 Editions.NOTE: You can install Windows Server 2003 without [ConfigurationDiskette]. Also, you can modify/newly create [Configuration Diskette]during the setup with NEC EXPRESSBUILDER.Creating Configuration DisketteThis section describes about specifying setup information that is necessary for OS installation andcreating [Configuration Diskette]. Follow the procedure below.NOTE: In the procedure below, the folder name that is specified wheninstalling Trekking command is assumed as [Configuration DisketteCreator].1. Start the OS.2. Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.Master Control Menu will appear.3. Right-click on the screen or left-click [Setup]. The menu will appear.
