5-20 Installing the Operating System with Express SetupNotes on Using the N8103-75 Controller BoardAfter installing OS, the driver does not installed according to the method of installing OSoccasionally.In that case, please install the driver by the following procedures.1. Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→ [Computer Management].2. Double-click the SCSI Controller driver which Device Manager lists as Other device.3. Click [Update Driver].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select "Don't search. I will choose the driver to install" and click [Next].6. Click [Have Disk..].7. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppydisk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].8. Specify the following driver and click [Next].– [INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)– [Adaptec SCSI Card 29320ALP -Ultra320 SCSI ] (When N8103-75 board is installed.)The installation of the driver is completed.Restart the system according to the message appeared on the screen.
