NEC Express5800/120Rg-1 User Manual

Also see for Express5800/120Rg-1: Datasheet User guide

Contents

NEC Express5800/120Rg-1 User Manual Manual pdf 266 page image

9-36 Upgrading Your ServerPROCESSOR (CPU)The server may have another CPU installed in addition to the standard CPU (Intel XeonProcessor).IMPORTANT: The CPU is extremely sensitive to static electricity. Make sure totouch the metal frame of the server to discharge static electricityfrom your body before handling the CPU. Do not touch the CPUpins by a bare hand or place the CPU directly on the desk. For staticnotes, see the section "Anti-static Measures" described earlier. Do not operate the system until confirming that the additionallyinstalled CPU is in normal state. Make sure to use the CPU authorized by NEC. Installing athird-party CPU may cause a failure of the CPU as well as the server.Repair of the server due to failures or damage resulted frominstalling such a board will be charged.Processor 2Processor 1FRONT REARMother boardNOTE: If the different revision of the processor is installed in themultiprocessor system, Windows logs the following information everystartup. If this message is logged, it is no problem for operation.