NEC Express5800/120Rg-1 User Manual

Also see for Express5800/120Rg-1: Datasheet User guide

Contents

NEC Express5800/120Rg-1 User Manual Manual pdf 255 page image

Upgrading Your Server 9-25DIMMInstall the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the motherboard in the server. The mother board is provided with 12 DIMM board slots.NOTE: Up to 48GB of memory (4GB DIMM × 12) can be installed.(The factory-installed DIMMs need to be replaced in this case.) TwoDIMMs of 1GB are factory-installed in DIMM slots #11 and #21.IMPORTANT: The DIMM is extremely sensitive to static electricity. Make sure totouch the metal frame of the server to discharge static electricityfrom your body before handling the DIMM. Do not touch theDIMM terminals or on-board parts by a bare hand or place theDIMM directly on the desk. For static notes, see the section"Anti-static Measures" described earlier. Make sure to use the DIMM authorized by NEC. Installing athird-party DIMM may cause a failure of the DIMM as well as theserver. Repair of the server due to failures or damage resulted frominstalling such a board will be charged.