Installing the Operating System with Express Setup 5-19Graphics Accelerator DriverThe graphics accelerator driver will be automatically installed by Express Setup or system update.SCSI Controller Driver (N8103-75/95/N8190-126)If you utilize SCSI controller driver (N8103-75/95/N8190-126), update your system with NECEXPRESSBUILDER CD-ROM attached to your system.The SCSI controller driver will be installed automatically.Disk Array Controller Driver (N8103-80F)To additionally install the N8103-80F in a system containing Windows Server 2003, connect thecontroller and take the following steps to install the driver:1. Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→ [Computer Management].2. Double-click [LSI Logic Megaraid SCSI 320-1] which Device Manager lists.3. Click the [Driver] tab and click [Update Driver...].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select the "Search for the best driver in these locations." and check the "Search removablemedia [floppy, CD-ROM...]" check box.6. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppydisk drive, and click [Next].7. Copying of the driver is completed, and the [Completing the Hardware Update Wizard]dialog box below appears. Click [Finish].
