868.6 ADDING SPEAKERSADDING REGULAR SPEAKERSIf required, the next step is to add speakers to achieve a configuration that fits your system.To add one or more speakers:• click on the Add Speaker button• in the From Layout drop-down list, select the speakertemplate from which you want to add one or more speakers:all the speakers available in the selected speaker layout aredisplayed in grey color;• click on the speaker you want to add: it will be displayed inyellow color;• click on the Add button next to the Speaker position drop-down list;Repeat this process for each additional speaker you want to add.Figure 61: Adding a speakerIMPORTANT NOTE: Some configurations are not allowed by the decoder specifications. In suchcase, a red warning will be displayed on the side panel and the relevant speakers will behighlighted in red.The side panel gives you some information on the prerequisite conditions for some speakers.NOTE: If you choose to add a speaker, the SDP-75 willautomatically suggest to add the mandatory associatedspeaker(s). This will help you to keep the integrity of therecommendations of each decoder.To add a subwoofer:1. Click on the Add Speaker button;2. Click on the Add Sub button below the Speaker position drop-down list.NOTE: The Add Sub button adds subwoofers regardless of formats. The subwoofer positions displayedare not significant and will not affect the sound.
