13014.4 QUICK SETUP MENUThe Quick Setup menu is a powerful tool allowing to configure the bass management for several speakers all at once.Figure 96: Bass Management Quick SetupThe Quick Setup menu is divided into 3 main section:1. Set Filters: This section is to specify the filter type and frequency that will be applied;2. Apply to selected speakers: Here, you can select the speakers on which you can apply the filters selected in thefirst section;3. And apply to associated sub(s): Select the sub(s) associated to the group of speakers and filters.The 3 sections are detailed in the sub-chapters below.The configuration steps are the followings:• Enter the desired settings in the 1| Set filters table;• Select the speakers on which you want to apply thoses settings on the 2| Apply to selected speakers section;• Select the associated sub(s) in the And apply to associated sub(s) section;• Press on the Apply button to validate;• Do the same for another group of speakers and sub if needed;• Listen and adjust if needed;• Save the preset.NOTE: It is not possible to apply the settings if no subs are selected. This means that you cannotdisable bass management on several speakers at the same time with the Quick Setup menu. To do so,please use the Individual Setup described in the next sub-chapter.
