45CHANGING THE WI-FI STATUS MODE OF THE SDP-75The SDP-75‘s built-in Wi-Fi and Ethernet modules allow it to simultaneously be part of a network as:• An Ethernet client connected to anexisting Ethernet network through anISP Box (Internet Service Provider) or arouter.• A Wi-Fi Access Point (AP) to create itsown Wi-Fi network.• A Wi-Fi client to join an existingnetwork wirelessly.To change the Wi-Fi settings of your SDP-75 via the graphical user interface:1. Open the Advanced Settings interface;2. Go to the Setup/Network page:3. Press the Setup… button to display the Wi-Fi Status Modes page:Figure 32: Wi-Fi Status modesYou can choose one of the following Wi-Fi modes:• OFF: the Wi-Fi module of the SDP-75 is disabled.• FULL (default): the SDP-75 is used both as an Access Point and as a Client.• CLIENT: the Access Point is disabled but the SDP-75 still operates as a Wi-Fi client as long as the configurationis valid.
