119Figure 84: Calibration page Figure 85: Metering page13.3 NORMAL CALIBRATION SEQUENCERemain in the Optimizer Settings/Calibration page of the Advanced Settings interface to perform the final calibration:• Follow the microphone placement instructions (see previous chapter);• Make sure the measurement environment is silent;• Press the Mute button to cut the outputs (this step must ALWAYS be performed before pressing the Calibratebutton);• Press the Calibrate button in the top right corner of the page;• Follow the on-screen instructions regarding the microphone.NOTES:• The calibration tool plays three bursts for every speakers and subwoofer;• The calibration page indicates which speaker is being calibrated.Figure 86: The calibration page
