35STEP 3: CONNECT TO THE SDP-75 FROM YOUR DEVICE2.2.4.1 USING A TABLET WITH MOCHA VNC LITETo connect to the SDP-75’s VNC Server from an iOS or an Android device, use the Mocha VNC Lite application:• Open the Mocha VNC Lite app in your iOS orAndroid device.• Click on the Configure menu item located in thetop left of the page.• In the Configure page, click on the line “New…Add a configuration”.Figure 16: adding a new VNC Server configurationIn the list of VNC Server parameters, click on the “i”button located in the top right of the page, next to theVNC server address.Figure 17: configuring the VNC ServerIn the list Find local workstations, select the linenamed “#VNC Server on SDP-XX”, where XX is thenumber of the SDP-75.Figure 18: selecting the VNC Server SDP-XXThe field VNC server address now shows the name“#VNC Server on SDP-XX”, where XX is the number ofthe SDP-75.Go to the field VNC password and enter the password,which is the six-digit serial number of the SDP-75:● the password is 00000X, if the number ofthe SDP-75’s VNC Server has a singledigit;● the password is 0000XX if the number ofthe SDP-75’s VNC Server has 2 digits;● the password is 000XXX if the number ofthe SDP-75’s VNC Server has 3 digits;● etc…The VNC Server is now configured.Figure 19: entering the passwordNow click on the Connect menu item. The “#VNCServer on SDP-XX” should be listed in the page.Select the line “#VNC Server on SDP-XX”.The graphic user interface of the SDP-75 should nowbe visible on the screen of your device. Figure 20: connecting to the SDP-75's VNC server
