534.2 USING THE FRONT PANELPOWER ON-OFF SEQUENCEIMPORTANT NOTE: don’t forget that the amplifiers should always be powered-on last.Turn On the main power switch on the rear panel to supply the SDP-75 with power, then press the front panel powerbutton to start the SDP-75.NOTE: The system doesn’t start instantly and takes about 60 seconds to complete its start-up.While the system starts, the front panel screen displays the following image:Figure 35: Front panel startup imageTo shut the SDP-75 down, press the front panel power button once. The front panel screen will then display thefollowing image until a complete shutdown.Figure 36: Front panel shut down imageNOTE: It is not recommended to cut the AC Power via the main power switch on the rear panel, as thesystem saves several “last-used” settings while shutting-down.
