645.4 LEVEL AND DELAY ALIGNMENT OPTIONSThe SDP-75’s optimization of the system can be switched on/off via the Main interface.To switch on/off the alignment options, click on the “OPT. Trinnov Optimizer" menu item of the lateral menu. Thefollowing alignment options are available in this page:• To activate/deactivate all of the Optimizer settings:o The Trinnov Optimizer switch• To activate/deactivate specific parts of the processing:o The Acoustic correction switcho The Level alignment switcho The Delay alignment switchFigure 43: Optimizer Settings page• Trinnov Optimizer ON/OFF: switch on/off the automatic correction of the in-room response: The acoustic correction,and the automatic delay and level alignment. When the Optimizer is off, only the manual settings related to the audioprocessor are applied:o Routing, as defined in Speaker Configuration Table in the 3D View page of the Main interface;o The Active Xovers frequencies and filters;o Levels, as defined in the Processor pages of the Advanced interface;o Graphic EQs, as defined in the Processor pages of the Advanced interface;o Bass Management, as defined in the Fine Tuning page of the Main interface.• Acoustic Correction ON/OFF: when turned off, both the automatic equalization (defined by the target curve) and theFIR EQs (defined in the Processor/Outputs page of the Advanced interface) are bypassed;• Level Alignment ON/OFF: disable the automatic alignment of speaker levels, meaning that no automatic gainchanges will be applied to the outputs;• Delay Alignment ON/OFF: disable the automatic alignment of speaker distances, meaning that no automatic delayswill be applied to the outputs.
