14919.4 SIGNAL FLOW OF THE SDP-75Not shown:• Input & output routing / Physical inputs &outputs• Manual input & output EqsSETUP PROCESS AND FILTERS CALCULATIONActive-Crossovers are set up first following a semi-automatic calibration procedure.The Optimizer’s filters calculation is made from the speaker measurement.Bass management crossover filters are applied after and regardless of the loudspeaker calibration. The crossoverfrequencies and bass management mode can therefore be modified after calibration.19.5 3D SPEAKER PLACEMENTRECOMMENDATIONSFor detailed information about speaker placement recommendations, please refer to the following documents:• Auro-3D Home Theatre Setup Installation Guidelines, available from Auro Technologies.• http://www.auro-3d.com/wp-content/uploads/documents/Auro-3D-Home-Theater-Setup-Guidelines_lores.pdf• Dolby Atmos Home Theatre Installation Guidelines, available from Dolby:• http://www.dolby.com/us/en/technologies/dolby-atmos/dolby-atmos-home-theater-installation-guidelines.pdfNOTE: As of July 2016, the DTS X Home Theatre Installation Guidelines are not yet available.
