Honeywell LYNX Touch Series Installation And Setup Manual

Also see for LYNX Touch Series: User guide Guide Installation and setup guide Programming guide Quick installation guide

Contents

Honeywell LYNX Touch Series Installation And Setup Manual Manual pdf 6 page image

LYNX Touch Installation and Setup Guide- 6 -Mounting the ControlWall Mounting5100-100-064-V0LOCKINGTABSTIE WRAPPOINTS (2)FRONTCASEBACKCASEINSTALLSCREWIN CASETAMPERMOUNTINGHOLES (4)ROTATEFRONT CASEUPWARDTO RELEASEHOOKSTIE WRAPPOINT (3)MOUNTINGHOOKS (HINGES)Release the front case from the back case bydepressing the two locking tabs at the top of the unitwith the blade of a medium size screwdriver.Separate the front and back case assemblies by rotatingthe front case so that it is perpendicular to the backcase and unsnapping (releasing) the two hooks from theback case.Feed the field wiring through the appropriate openingsin the back case. Use tie-wraps to secure the wiring tothe built-in wire loops as needed.DETAIL AMount the back case to a sturdy wall using self tapping screws.If required, install an additional mounting screw in the casetamper (see Detail A).Attach the front and back cases by connecting thehooks on the front case to the attachments on the backcase. Once attached, the hooks will support the frontcase and allow you to make the wiring connections.After all wiring connections have been made, snap thefront case and back case closed and ensure that the caseis secured by the locking tabs.1.2.3.4.5.6.7.Desktop MountingFor desktop mounting, the optional mounting base (model L5000DM, purchased separately) must be used.5100-500-004-V0Slide the control panel onto the mounting base lockingtabs.Bring all wiring through the bottom of the mountingbase, using one of the wire entry locations, beforemaking connections to the control panel.Use tie-wraps to secure the wiring to the built-in wireloops as needed.Use the supplied screws to secure the control panel tothe mounting base.1.2.3.4.Wiring OverviewThe following summarizes the connections required. Refer to the Wiring Connections paragraph and theSummary of Connections diagram on the inside back cover when making connections.5100-100-062-V0TERMINALSTRIPTELEPHONECONNECTIONTELEPHONECONNECTIONSPOWER SUPPLYRECEPTACLESTANDARDCAPACITY BATTERYCONNECTIONSUPERHIGH CAPACITYBATTERYCONNECTIONEDGECONNECTORTAMPERSWITCHGSMVLP5-4G/ILP5RECEPTACLEEDGECONNECTOR