Honeywell LYNX Touch Series Installation And Setup Manual

Also see for LYNX Touch Series: User guide Guide Installation and setup guide Programming guide Quick installation guide

Contents

Honeywell LYNX Touch Series Installation And Setup Manual Manual pdf 18 page image

LYNX Touch Installation and Setup Guide- 18 -Mechanics of ProgrammingGeneral Programming InformationWhen power cycling the control, remove AC power first and wait approximately 1 minute beforedisconnecting battery.Programming options are stored in non-removable, electrically erasable, nonvolatile EEROM memory. Thesystem can be programmed at any time, even at the installer's premises prior to the actual installation.Simply apply power temporarily to the Control and then program the unit as desired.The “Initiate Download” button is used to initiate remote programming using an IBM PC compatiblePersonal Computer, and Compass Downloader and modem or via capable GSM or IP communicationsmodules. See the Remote Programming/Control (Downloading) section for additional information.ProgrammingIf the system is Armed or in Alarm, the Tools icon will not be functional. The system must firstbe disarmed.Enter Installer Programming ModeSCREEN ACTIONReady To Arm5000-100-006-V1Arm AwayDelayPhoneMoreAutomationMessageZonesArm Stay7210:18 AM June 8, 20101. At the Home Screen select “More”.2. Select “Tools”. The touchscreen displays a keypad.3. Enter the Installer Code 4112.4. The System Programming Screen is displayed. Select“Program” to display the following options:Installer CodeDate TimeZonesKeysSystem TypeCommunicatorComm. DiagnosticsReporterUse the down T arrow to scroll to the next page of options.SounderDefault Config.Reset Master CodeSystem SettingsLanguage*Z-Wave5. The system advances to the Programming screen of theselected option.* This programming field may not be available with the systembeing installed.