Honeywell LYNX Touch Series Installation And Setup Manual

Also see for LYNX Touch Series: User guide Guide Installation and setup guide Programming guide Quick installation guide

Contents

Honeywell LYNX Touch Series Installation And Setup Manual Manual pdf 47 page image

LYNX Touch Installation and Setup Guide- 47 -Programming the ControlUpdate ServerThis procedure is used to upload the Configuration File to the Server.SCREEN ACTIONComm. Diagnostics1. Select “Comm. Diagnostics” The System displays the following options depending uponthe communication device that is installed:WiFi LocationNoneConfigureWiFiEthernetInformationGSMInformationUse the down T arrow to scroll to the next page of options. Use the S arrow to return tothe previous page:CommunicationStatusTestCommunicationSetupCommunicationCommunicationID NumbersSetupCommunication2. Select “Setup Communication”. The System advances to the Registration screen andthe following options are displayed:RegisterDeviceRegister DeviceWith PINUpdateServerFactoryDefaults3. Select “Update Server” and select “Yes” when the confirmation screen appears. Thedevice uploads its entire configuration file to the server. Selecting “No” will cancel theoperation. (Refer to the table below for applicable registration messages.)During the upload process the following messages may be displayed:Message MeaningUpdating Root File… The root file is being uploaded.Programming Done Indicates the root file has been successfully uploaded.Updating Configuration – Try Later! Error message indicates the module is busyCannot Upload – Try Later! Error message indicates the communication path(s) is not available.Update Root File – Failed! Error message indicates an error while uploading root file.Enroll the L5100-WiFi ModuleThe module can be enrolled using one of the following procedures:• Scan Access Points• Manual Configure Access Points• WPS (If available)SCREEN ACTIONComm. Diagnostics1. Select “Comm. Diagnostics” The System displays the following options depending uponthe communication device that is installed:WiFi LocationNoneConfigureWiFiEthernetInformationGSMInformationUse the down T arrow to scroll to the next page of options. Use the S arrow to return tothe previous page:CommunicationStatusTestCommunicationSetupCommunicationCommunicationID Numbers