1-37and 40; using SP for scheduling queue 6 and queue 7. Display queue schedulingconfiguration information after the configuration. system-view[Sysname] queue-scheduler wrr group1 3 20 4 20 5 30 group2 0 20 1 20 2 40[Sysname] display queue-schedulerQID: scheduling-group weight-----------------------------------0 : wrr , group2 201 : wrr , group2 202 : wrr , group2 403 : wrr , group1 204 : wrr , group1 205 : wrr , group1 306 : sp 07 : sp 0Configuring Traffic AccountingRefer to Flow-Based Traffic Accounting for information about traffic accounting.This feature is available only on the H3C S5100-EI series switches.Configuration prerequisitesThe ACL rules for traffic classification have been defined. Refer to the ACL module of thismanual for information about defining ACL rules.Configuration proceduresYou can collect/clear traffic statistics about incoming ACL matching packets globally, in aVLAN, in a port group, or on a port.1) Configuring traffic accounting globallyFollow these steps to collect/clear statistics about the incoming ACL matching packetsglobally:To do… Use the command… RemarksEnter system view system-view —Collect statistics of thepackets matching a specificACL ruletraffic-statistic inboundacl-rule Required
