H3C S5100-SI Operation Manual

Also see for H3C S5100-EI: Operation manual Installation manual Quick start

Contents

H3C S5100-SI Operation Manual Manual pdf 336 page image

1-5Network diagramFigure 1-3 Network diagram for IP address configurationConfiguration procedure# Configure an IP address for VLAN-interface 1. system-view[Switch] interface vlan-interface 1[Switch-Vlan-interface1] ip address 129.2.2.1 255.255.255.0IP Address Configuration Example IINetwork requirementsAs shown in Figure 1-4, a port in VLAN 1 on a S5100-SI is connected to a LAN comprising twosegments: 172.16.1.0/24 and 172.16.2.0/24.To enable the hosts on the two network segments to communicate with the external network through theswitch, and the hosts on the LAN can communicate with each other, do the following:z Assign two IP addresses to VLAN-interface 1 on the S5100-SI.z Set the S5100-SI as the gateway on all PCs in the two networks.Network diagramFigure 1-4 Network diagram for IP address configurationConfiguration procedure# Assign a primary IP address and a secondary IP address to VLAN-interface 1.

system-view