1-4[Sysname-Vlan-interface10] ip address 1.1.1.1 255.255.255.0[Sysname-Vlan-interface10] quit# Configure the default route.[Sysname] ip route-static 0.0.0.0 0.0.0.0 1.1.1.2Displaying and Maintaining management VLAN configurationTable 1-2 Displaying and Maintaining management VLAN configurationOperation Command RemarksDisplay the IP-relatedinformation about amanagement VLAN interfacedisplay ip interface [ brief ][ Vlan-interface [ vlan-id ] ]Display the information about amanagement VLAN interfacedisplay interfaceVlan-interface [ vlan-id ]Display summary informationabout the routing tabledisplay ip routing-table [ |{ begin | exclude | include }regular-expression ]Display detailed informationabout the routing tabledisplay ip routing-tableverboseDisplay the routes leading to aspecified IP addressdisplay ip routing-tableip-address [ mask ][ longer-match ] [ verbose ]Display the routes leading to aspecified IP address rangedisplay ip routing-tableip-address1 mask1 ip-address2mask2 [ verbose ]Display the routing informationof the specified protocoldisplay ip routing-tableprotocol protocol [ inactive |verbose ]Display the routes that match aspecified basic access controllist (ACL)display ip routing-table aclacl-number [ verbose ]Display the routes that match aspecified IP prefixdisplay ip routing-tableip-prefix ip-prefix-name[ verbose ]Display the routing table in atree structure display ip routing-table radixDisplay the statistics on therouting tabledisplay ip routing-tablestatisticsOptionalAvailable in any view.Clear statistics about a routingtablereset ip routing-tablestatistics protocol { all |protocol }Use the reset command in userviewDelete all static routes delete static-routes all Use the delete command insystem view.
