259Troubleshootingwww.gateway.comYou see a “Not enough memory” error message■ Close all programs, then restart your notebook.ModemYour modem does not dial or does not connect■ Make sure that the modem cable is plugged into the modem jack and notthe Ethernet network jack. See “Left side” on page 3 to make sure that theconnections have been made correctly.■ Make sure that your notebook is connected to the telephone line and thetelephone line has a dial tone.■ Make sure that the modem cable is less than 6 feet (1.8 meters) long.■ Remove any line splitters or surge protectors from your telephone line,then check for a dial tone by plugging a working telephone into thetelephone wall jack.■ If you have additional telephone services such as call waiting, callmessaging, or voice mail, make sure that all messages are cleared and callwaiting is disabled before using the modem. Contact your telephoneservice to get the correct code to temporarily disable the service. Also makesure that the modem dialing properties are set appropriately.Help andSupportFor more information about troubleshooting memory errorsin Windows XP, click Start, then click Help and Support.Type the keyword memory error in the HelpSpot Searchbox , then click the arrow.
