253Troubleshootingwww.gateway.comTo check IRQ usage in Windows 2000:1 Click Start, Settings, then click Control Panel. The Control Panelwindow opens.2 Double-click the System icon, click the Hardware tab, then clickDevice Manager. The Device Manager window opens.3 Click View, then click Resources by type. Double-click Interrupt request(IRQ). All IRQs and their hardware assignments are displayed.To free IRQ resources for the new device:1 In the Device Manager window, check the device list for a resourceconflict. A resource conflict appears as a black exclamation point ina yellow circle.2 Remove the device you are trying to install, then determine whichone of the existing devices or ports you can disable.3 Right-click the device or port you want to disable, then click Disable.The device or port is disabled.Diskette driveThe diskette drive is not recognized■ Shut down and restart your notebook.■ The USB cable may not be inserted completely into the USB port. Pressthe cable into the port, then try to access the diskette again.You see an “Access Denied” or “Write protect” error message■ Move the write-protection tab in the upper-right corner of the diskettedown (unprotected).■ The diskette may be full. Delete unnecessary files on the diskette and tryagain.■ Not all diskettes are IBM-compatible. Make sure that the diskette you areusing is IBM-compatible.
