77Adjusting the FocusPush AFPress and hold the PUSH AF button.The camcorder will focus automatically using the highest AFspeed and AF response as long as you hold the PUSH AFbutton pressed down.NOTESNOTES• The focus will be locked in the following cases.- When > [v $ Camera Setup] > [Face AF] isset to [Face Only] and no face is detected.- When > [v # Camera Setup] > [AF Mode] isset to [AF-Boosted MF] and the focus is the manualadjustment range.• When the AF mode cannot be selected (A 78), Push AF (autofocus at the highest speed) is not availableeither.AF-Boosted MFIn this focus mode, you can focus manually most of the wayand let the camcorder finish focusing automatically. This is veryconvenient when you want to make certain that your 4Krecordings are in sharp focus.Additionally, with this mode, if the camcorder cannot evaluatehow to adjust the focus, it will not perform unreliable focusadjustments. This results in an overall more stable focusingoperation than with continuous AF.1 Set the FOCUS switch to A.• @ appears on the left of the screen.2 Set [AF Frame] to a setting other than [Automatic](steps 1-2, A 79).3 Select [AF Mode].> [v # Camera Setup] > [AF Mode]4 Select [AF-Boosted MF] and then press SET.• When the focus is in the manual adjustment range, the focus frame will appear in yellow.5 If necessary, change the size and position of the AF frame (A 79).6 Turn the focus ring to adjust the focus.• Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustmentrange, the focus frame will turn white and the camcorder will then finish focusing automatically.• While the focus stays within the automatic adjustment range, the camcorder will keep the subject in focusautomatically.
