71ZoomingUsing the Handle Zoom RockerYou can set the zoom speed of the handle zoom rocker usingthe ZOOM SPEED switch and the menu.1 Set the ZOOM switch to ROCKER.2 Move the zoom rocker toward T to zoom out (wide-angle) and toward S to zoom in (telephoto).Handle zoom rocker: Approximate zoom speeds (time required to zoom end-to-end)* When the zoom speed is too fast, it will be more difficult to focus while zooming.Setting the Zoom Speed1 Select the overall speed level (steps 1-2, A 70).2 Select [Handle Zoom Speed H] or [Handle Zoom Speed L].> [v % Camera Setup] > [Handle Zoom Speed H] or [Handle Zoom Speed L]• You can set the zoom speed independently for each of the positions of the ZOOM SPEED switch.3 Select the desired speed and then press SET.4 Set the ZOOM SPEED switch to H or L.• You can set the ZOOM SPEED switch to OFF to disable the zoom rocker on the handle.Using the Supplied Wireless Controller or anOptional Remote ControllerSet the ZOOM switch to ROCKER to operate the zoomremotely. The zoom speeds when using the supplied wirelesscontroller, the optional RC-V100 Remote Controller or acommercially available remote control connected to theREMOTE terminal are different. When using the suppliedwireless controller, you must press the record enable buttonand T or W button simultaneously to zoom.[v % Camera Setup] >[Handle Zoom Speed H] / [Handle Zoom Speed L][v % Camera Setup] > [Zoom Speed Level][Low] [Normal] [High][1] (slowest) 4 min 38 sec 2 min 1 min[16] (fastest) 4.2 sec 2.6 sec 0.9 sec*
