FTP File Transfer176FTP File TransferYou can transfer clips from the camcorder to another device connected to the network, using the FTP protocol.The following explanations assume that the FTP server is on, ready and correctly configured.FTP Server and Transfer SettingsBefore you can transfer clips to a connected device, you need to configure the FTP server settings and othersettings related to the handling of folders and files. If necessary, consult the network administrator in charge ofthe FTP server.1 Select [FTP Transfer Settings].> [ ! Network Settings] > [FTP Transfer Settings]2 To enter the destination FTP server, select [FTP Server] and then press SET.• Enter the FTP server’s IP address or host name using the keyboard screen (A 27).3 Enter the [FTP: User Name], [FTP: Password], and [Destination Folder] in the same way.4 To change the port number, select [Port No.] and then press SET.• To enter the port number, push the joystick left/right to select the digit to change and then up/down to selecta value for the selected digit. After completing the five digits of the port number, select [Set] and then pressSET.5 To activate the passive mode, select [Passive Mode].• Select the desired option and then press SET.• [Off] is the standard setting for most cases. [On] (passive mode) is more appropriate for FTP transfers frombehind a firewall.6 To select whether to create a new folder for every transfer date, select [New Folder by Date].• Select the desired option and then press SET.7 To select how to handle file transfers when a file with the same name already exists, selects [SameNamed Files].• Select the desired option and then press SET.Options for [New Folder by Date][On]: A new subfolder under the transfer destination folder “YYYYMMDD\HHMMSS” will be createdfor every transfer operation.[Off]: All the files will be transferred to the folder set as [Destination Folder] in the FTP server settings.Options for [Same Named Files][Skip]: If a file with the same name already exists in the destination folder, the file will not be transferred.[Overwrite]: Even if a file with the same name already exists in the destination folder, the file will betransferred, overwriting any file with the same name in the destination folder.NOTES• You can check the current FTP settings on the [Network 4/6] to [Network 6/6] status screens.Operating modes:
