Assignable Buttons1182 Push the joystick up/down to select the desired function and then press SET.• The selected function will be assigned to the selected button.• If you selected one of the preset functions, the rest of the procedure is not necessary. If you selected [UserSetting], continue the procedure to register a menu setting.3 Navigate the menus to find the menu setting you want to register and then press SET.• The selected menu setting will be assigned to the selected button. User-selected settings will be indicatedwith a icon in the [ Assignable Buttons] menu.4 Press the assignable button to use the assigned function as described in the following table.NOTES• You can check the [Assignable Buttons] status screens (A 197) to see what functions are currently assignedto each button.• You can reset only the functions assigned to the assignable buttons, without affecting other camcordersettings, with the > [B ! System Setup] > [Reset] > [Assignable Buttons] function. All theassignable buttons will return to their default function.Assignable functionsFunctions can be set separately in mode and mode. Refer to the following table for assignablefunctions and available modes.Function name Description A[(NONE)] No function assigned – the button is disabled. Ü Ü –[Image Stabilizer] Turns image stabilization on/off. Ü – 83[Powered IS] Turns the Powered IS image stabilizer on/off. Ü –[Face AF] Toggles the [Face AF] setting between [Face Priority] and [Face Only]. Ü – 79[Face Det. & Tracking] Turns the face detection and tracking function on/off. Ü –[Tracking] Turns the tracking function on/off. Ü – 81[Focus Limit] Applies/removes the focus limit set in the menu. Ü – 82[Focus Guide] Turns the Dual Pixel Focus Guide function on/off. Ü – 75[Peaking: All] Turns peaking on/off. Ü –76[Peaking: LCD],[Peaking: VF],[Peaking: SDI],[Peaking: HDMI]Turns peaking on/off on the LCD screen, viewfinder, and video output from theSDI terminal or HDMI OUT terminal, respectively. Ü –[Magn.: All] Turns magnification on/off. Ü –76[Magn.: VF+LCD],[Magn.: SDI/HDMI]Turns magnification on/off on the LCD screen and viewfinder (together) and onvideo output from either the SDI or HDMI OUT terminal, respectively. Ü –[Digital Zoom] Turns the 300x digital zoom on/off. Ü –68[Tele-converter] Cycles through the digital tele-converter options in the following order:6.0x 3.0x 1.5x Off. Ü –[Push Auto Iris] The camcorder adjusts the aperture automatically only while the button is heldpressed down. Ü – 60[ND +], [ND –] Cycles through ND filter settings in increasing (higher density) or decreasing(lower density) order, respectively. Ü – 58[AE Shift +], [AE Shift –] Adjusts the target set for automatic exposure adjustment making it brighter ordarker, respectively. Ü – 61[Backlight], [Spotlight] Turns the respective light metering option on/off. Ü – 62
