Changing Main Functions with the FUNC Button52Changing Main Functions with the FUNC ButtonYou can adjust three main functions—shutter speed, white balance and gain—using the FUNC button (directsetting mode).This section will explain the basic operation of the direct setting mode. For specific details about the functionsrefer to the each function’s section: shutter speed (A 53), white balance (A 65), gain (A 56).Using the Direct Setting Mode1 Press the FUNC button.• The onscreen display of the function to be adjusted will behighlighted in orange.• Press the FUNC button repeatedly or push the joystick left/right to select the function you wish to adjust:- White balance mode- Color temperature value- Color compensation (CC) value- Gain value- Shutter speed, angle or frequency2 Push the joystick up/down to select the desired value orwhite balance mode and then press SET.• The selected value will be set and the camcorder will exit the direct setting mode.• The onscreen display of the selected function will return to normal.• Depending on the function selected, additional adjustment may be possible or necessary before pressingSET.NOTESNOTES• The camcorder will automatically end the direct setting mode in the following cases.- If no operation was performed for more than 6 seconds.- If the menu or a status screen was opened.Operating modes:
