Zooming70Grip zoom rocker: Approximate zoom speeds (time required to zoom end-to-end)* When the zoom speed is too fast, it will be more difficult to focus while zooming.Setting the Zoom Speed1 To set the overall speed level, select [Zoom Speed Level].> [v % Camera Setup] > [Zoom Speed Level]2 Select [Low], [Normal] or [High] and then press SET.3 Select [Grip Zoom Speed].> [v & Camera Setup] > [Grip Zoom Speed]4 Select the desired option and then press SET.• If you selected [Constant] or [User Setting], select the constant speed or customize the zoom speed patternwith the following procedures.Options[Constant]: Select one of 16 constant zoom speeds.[Variable]: Variable zoom speed (zoom faster the harder you press).[User Setting]: You can customize up to 3 zoom speed patterns, setting the desired zoom speed for 5individual pressure levels. You can, for example, set a pattern where the grip zoom rocker onlystarts to react beyond a certain pressure level to avoid accidental zoom operations.To select the constant speed level1 Select [Constant Speed].> [v & Camera Setup] > [Constant Speed]2 Select the desired speed (1 to 16) and then press SET.To customize the [User Setting] zoom speed pattern1 Select [Users Settings].[v & Camera Setup] > [Users Settings]2 Push the joystick left/right to select the zoom speed pattern ([User 1] to [User 3]) you want to use.• To use the preset zoom speed pattern as is, select [OK] and then press SET. The rest of the procedure is notnecessary. Otherwise, continue the procedure to customize the zoom speed pattern.3 Select [Edit] and then press SET.4 Push the joystick up/down to select the desired speed (0 = disabled, 1 to 16) and then press SET.• Change the speed for the rest of the pressure levels in the same way.5 Select [Set] and then press SET.• To reset the zoom speed pattern to its preset values, select [Reset] instead.NOTESNOTES• When > [v % Camera Setup] > [High-Speed Zoom] is set to [On] and the grip rocker's zoomspeed is set to [Variable], when you operate the zoom in record standby mode, the actual zoom speed will beas if the overall speed level were set to [High]. While recording, the zoom speed level will follow the speed levelset in the menu.[v & Camera Setup] > [v % Camera Setup] > [Zoom Speed Level][Grip Zoom Speed] [Constant Speed] [Low] [Normal] [High][Constant] [1] (slowest) 4 min 38 sec 2 min 1 min[16] (fastest) 4.2 sec 2.6 sec 0.9 sec*[Variable] – 4.2 sec – 4 min 38 sec 2.6 sec – 2 min 1 sec* – 1 min
