99Saving and Loading Menu SettingsMenusTable of Contents IndexSaving and Loading Menu SettingsAfter you adjust settings in the FUNC. menu and setup menus, you can save those settings on an SD card. Youcan load those settings at a later date or on another XC10 camcorder so that you can use that camcorder in thatsame exact way.Saving Menu Settings to an SD Card1 Press the MENU button.2 Open the [Backup Menu Settings 8] submenu.[ System Setup] > [4] (in mode) or [3] (in other modes) >[Backup Menu Settings 8]3 Touch [Save] and then touch [Yes].• The current settings are saved to the SD card.4 When the confirmation screen appears, touch [OK] and then touch [X].Loading Menu Settings from an SD Card1 Press the MENU button.2 Open the [Backup Menu Settings 8] submenu.[ System Setup] > [4] (in mode) or [3] (in other modes) >[Backup Menu Settings 8]3 Touch [Load] and then touch [Yes].• After the camcorder’s current settings are replaced with the settingssaved on the SD card, the screen will turn black momentarily and the camcorder will restart.NOTES• Only menu settings from other XC10 camcorders can be used with this camcorder.• The following settings in the FUNC. menu and setup menus will not be saved.- FUNC menu: [Pre REC], [Self Timer], the automatic/manual setting for [Exposure Lock],^ [Magnification], [Powered IS]- Setup menus:[{ Camera Setup] > [2] > [Flash][3 Recording Setup] > [1] > [Interval Recording][3 Recording Setup] > [3] > [Color Bars][— Wi-Fi Setup] > [1] > [Smartphone Connection][ System Setup] > [1] > [Date/Time]Operating modes:[ System Setup][4] (in mode) or[3] (in other modes)[Backup Menu Settings 8][ System Setup][4] (in mode) or[3] (in other modes)[Backup Menu Settings 8]
