Playback106MenusTable of Contents IndexPlaying an HD-sized Clip from a 4K ClipWhen playing back a 4K clip, you can select an HD-sized portion of the frame to play back.Output from the HDMI OUT terminal will be HD during this playback mode.1 Play back the desired 4K clip.2 During playback or playback pause, touch the screen to display the playback controls and thentouch [ ].• The screen will be magnified and a white frame representing the whole screen area is displayed on the topleft of the screen. The white rectangle within it represents the approximate part of the image beingdisplayed.• Drag your finger across the screen to move the white rectangle around and select the portion of the imageto play back.• Touch [ ] to switch back to normal playback mode.Capturing Photos from 4K Clips (4K Frame Grab) and HD ClipsYou can capture a photo from a clip during playback pause. Captured photos are saved on the SD card. Thesize of the photo will depend on the type of clip it was captured from.1 Play back the clip from which you want to capture the photo.2 Pause the playback at the point you want to capture (A 100).• If you press the PHOTO button halfway during playback, the playback speed will slow to 1/8 normal,allowing you to find the desired point more easily.3 Press the PHOTO button or touch [ ] to capture a photo.• {Ð8 appears on the bottom right of the screen.• The ACCESS indicator will flash as the photo is being recorded.4 Touch [Ñ] to stop playback.Photo size by clip typeIMPORTANT• Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so mayresult in permanent data loss.- Do not disconnect the power source or turn off the camcorder.- Do not open the recording media slot cover.Operating modes:Operating modes:Clip Photo size4K clip (4K Frame Grab) 3840x2160HD clip 1920x1080HD clip recorded in slow motion at x1/4 1280x720
