123Viewing and Changing Wi-Fi SettingsMenusTable of Contents IndexViewing and Changing Wi-Fi SettingsYou can view and change Wi-Fi connection settings saved in the camcorder. Because the settings must bechanged manually, adequate knowledge about configuring and using Wi-Fi networks is required. If BrowserRemote has been activated, deactivate it before performing the following settings.To enter text for the various settings, use the virtual keyboard (A 121).To view the smartphone’s connection settings1 Press the MENU button.2 Open the [Smartphone Connection] submenu.[— Wi-Fi Setup] > [1] > [Smartphone Connection]• The camcorder’s SSID (network name), password and operatingfrequency will appear.To change the SSID and password3 Touch [ ] next to [Camcorder’s Password] and then touch [OK].• The camcorder will randomly choose a new SSID and password.4 Touch [OK].To change the operating frequency3 Touch [ ] next to [Frequency].4 Select [2.4 GHz] or [5 GHz] and then touch [K] twice.To view the access point’s connection settings1 Press the MENU button.2 Open the [Access Point Connection] submenu.[— Wi-Fi Setup] > [1] > [Access Point Connection]• The access points’ SSID settings saved in the camcorder’s memorywill appear.• To add an access point, touch [Not configured] and then perform theprocedure inWireless Connections Using Wi-Fi (A 119). After doingso, the [— Wi-Fi Setup] menu will appear.3 Touch the SSID whose settings you want to view or change.• The access point’s settings will appear. You cannot change the MAC address.• Touch [Í] and [Î] to view more information.• To delete the settings, touch [Edit] > [Delete] > [Yes].• To change the settings, touch [Edit] > [Manual Setup] and then perform the procedure inManual Setup(A 122).4 Touch [K] twice and then touch [X].Operating modes:[— Wi-Fi Setup][1][Smartphone Connection][— Wi-Fi Setup][1][Access Point Connection]
