Wireless Connections Using Wi-Fi122MenusTable of Contents IndexManual SetupIf you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow theinstructions on the screen to complete the procedure.To enter text for the various settings, use the virtual keyboard (A 121).1 Press the MENU button.2 Open the [Access Point Connection] submenu.[— Wi-Fi Setup] > [1] > [Access Point Connection]3 In the access point selection screen, touch [Not configured] andthen touch [Manual Setup].4 In the [SSID] (network name) field, touch [Not configured].• Enter the SSID (network name) of the selected Wi-Fi network.5 In the [Authentication/Encryption Method] field, touch [OPEN NONE] and then touch the desiredmethod.• If you selected [OPEN WEP], the WEP index is 1.• If you selected [OPEN NONE], skip to step 6.6 In the [Encryption Key] field, touch [Not configured].• Enter the encryption key.7 Touch [Automatic] or [Manual] to select how to obtain the IP address.• If you selected [Automatic], proceed to step 12.8 In the [IP Address] field, touch [0.0.0.0]. Touch the first field and touch [Í]/[Î] to change the value.Change the rest of the fields in the same way and then touch [OK].9 Enter the [Subnet Mask] field in the same way and then touch [Next].10 Enter the [Default Gateway] field in the same way and then touch [Next].11 Enter the [Primary DNS Server] and [Secondary DNS Server] fields in the same way and then touch[Next].12 When the confirmation screen appears, touch [OK] and then touch [X].IMPORTANT• The Wi-Fi functions available and the setup method will vary depending on the specifications andcharacteristics of the Wi-Fi network you want to use.[— Wi-Fi Setup][1][Access Point Connection]
