Using Looks64MenusTable of Contents IndexAdjusting the Settings of a Pre-installed Look1 Touch [ ].2 Adjust the desired setting by touching [-] or [+].• [Sharpness]: 0 (low sharpness) to 7 (high sharpness)[Contrast]1 : -4 (low contrast) to +4 (high contrast)[Color Depth] 2 : -4 (shallower colors) to +4 (richer colors)1 Not available for [ Wide DR].2 Not available for [ Sepia] and [ Monochrome].Creating a User-defined LookYou can create your user-defined looks based on one of the pre-installed looks. The camcorder can store twouser-defined looks for clips and two for photos.1 Touch [FUNC.] and then touch [Looks].2 Select which user-defined setting icon to use.• Select [ v User Setting 1] or [ v User Setting 2] for clips and [ { User Setting 1] or[ { User Setting 2] for photos.3 Touch and then touch [Standard].4 Select the look that will be the basis of the user-defined look.• The settings for [ Canon Log] cannot be adjusted.5 Touch [Yes] and then touch [OK].6 Adjust the settings as described in the previous section.7 Touch [X].
