Canon XC10 Instruction Manual

Also see for XC10: Quick guide Quick start guide

Contents

Canon XC10 Instruction Manual Manual pdf 119 page image

119Wireless Connections Using Wi-FiMenusTable of Contents IndexWireless Connections Using Wi-FiThe camcorder is Wi-Fi certified and can connect to a Wi-Fi network using an external accesspoint (wireless router) or can itself serve as a Wi-Fi access point. The camcorder can connect towireless routers (access points) compliant with the 802.11a/b/g/n protocol and are Wi-Fi certified(bear the logo shown on the right).The camcorder offers 5 ways to connect to a Wi-Fi network and the method you use will depend on the type andspecifications of the access point and network you want to use. Note that using an unprotected Wi-Fi networkcan expose your data to monitoring by unauthorized third parties. Be aware of the risks involved.WPS (button): If your wireless router supports Wi-Fi Protected Setup (WPS), setup will beeasy and require minimal configuring and no passwords. To check if your wireless routerhas a WPS button and for details about how to activate the Wi-Fi protected setup, refer tothe instruction manual of your wireless router.WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS usinga PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wirelessrouter’s WPS function. For details refer to the instruction manual of your wireless router.Searching for Access Points: If your access point does not support the WPS function or you cannot activate it,you can have the camcorder search for access points in the area.Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automaticallydetected by the camcorder, you can enter all the necessary settings manually. This requires more advancedknowledge of Wi-Fi and network settings.Camera Access Point: When shooting in a location where there are no access points available, the camcordercan serve as a wireless access point*. Wi-Fi enabled devices will be able to connect to the camcorder directly.* Limited only to the connection between the camcorder and supported Wi-Fi enabled devices. The functionality is not the sameas that of commercially available access points.Wi-Fi Protected Setup (WPS)Wi-Fi Protected Setup (WPS) is the easiest way to connect to a Wi-Fi access point. You can do simply bypushing a button (if the access point (wireless router) you want to connect to has a WPS button) or using a PINcode issued by the camcorder.Wireless Routers with a WPS Button1 Press the MENU button.2 Open the [Access Point Connection] submenu.[— Wi-Fi Setup] > [1] > [Access Point Connection]3 Touch [Not Configured] and then touch [WPS: Button].4 Press and hold the WPS button on the wireless router.• The length of time required to hold down the WPS button dependson the wireless router. Refer to the instruction manual of your wireless router and make sure the wirelessrouter’s WPS function is activated.Operating modes:[— Wi-Fi Setup][1][Access Point Connection]