Media Server130MenusTable of Contents IndexMedia ServerUsing the media server function, you can wirelessly view your photos from a connected network device. You willneed an access point connected to your network and the software installed on your computer that can playphotos on the media server.1 Camcorder: Open the [}] index screen (A 100).2 Camcorder: Press the MENU button.3 Camcorder: Open the [— Media Server] screen.[— Wi-Fi Setup] > [1] > [— Media Server]• If the camcorder has an access point connection saved, [Connected]appears on the screen and the connection is automaticallyestablished.• If the camcorder does not have an access point connection saved, you will be prompted to do so. Performthe procedure inWireless Connections Using Wi-Fi (A 119).• Touch [View Information] to see the access point’s SSID (network name), connection protocol, camcorder’sIP address and camcorder’s MAC address.• From the information screen above, touch [Change Connection Point] to connect to a different access point.4 Computer: Start the media playback software and select [Canon XC10] from the list of servers.5 Computer: Select the desired photo to play back from the displayed folder.6 Camcorder: To end the media server function, touch [End] and then touch [OK].Operating modes:[— Wi-Fi Setup][1][— Media Server]
