49Shooting ModesMenusTable of Contents IndexShooting ModesSetting the Shooting ModesThis camcorder offers various shooting modes to help bringyour creative intent to life. After you select a mode, you canadjust related settings, such as the shutter speed, using thecontrol dial. You can also use the FUNC. menu or BrowserRemote application.1 While holding down the shooting mode dial button,turn the dial to the desired shooting mode.• The available shooting modes are explained in thesections in the following few pages.• Depending on the shooting mode, you may be able toadjust the aperture, shutter speed, ISO speed or gain.2 Turn the control dial to adjust the setting, if available.Manual Exposure (n)With this mode, you have full access to menus, settings and other functions. When shooting, you can use thecontrol dial to adjust the aperture, shutter speed or ISO speed/gain*. This mode gives you the most freedomover shooting settings. First, assign the function that will be adjusted by the control dial.* The gain can be adjusted only for clips, not photos.1 Set the shooting mode dial to n.2 Press the MENU button.3 Open the [Control Dial] submenu.[ System Setup] > [3] (in mode) or [2] (in mode) >[Control Dial]4 Select the desired function to assign to the control dial.5 Touch [X].• The current value will be highlighted in orange.• During mode, when you select [ ISO/Gain], you can selectwhether to have control over the ISO speed or gain with the procedure below before touching [X].6 Turn the control dial to select the desired value.• You can also select the desired value using the FUNC. menu or Browser Remote application (A 54).Operating modes:[ System Setup][3] (in mode) or[2] (in mode)[Control Dial][ Aperture]
