Recording Audio80MenusTable of Contents IndexNOTES• When the audio level meter reaches the red point (0 dB), the sound may be distorted.• We recommend using headphones to check the sound level while adjusting the audio recording level or whenthe microphone attenuator is activated.Wind Screen (Built-in Microphone)The camcorder automatically reduces the background sound of windwhen recording outdoors. You can select from two levels or turn off theauto wind screen.1 Make sure ‘ [Audio Scene] is set to [„ Custom Setting](A 78).2 Press the MENU button.3 Open the [Built-in Mic Wind Screen] submenu.[¡ Audio Setup] > [1] > [Built-in Mic Wind Screen]4 Select the desired option and then touch [X].OptionsNOTES• Some low-frequency sounds will be suppressed along with the sound of wind. When recording insurroundings unaffected by wind or if you want to record low-frequency sounds, we recommend setting[Built-in Mic Wind Screen] to [j Off à].[H Auto (High)]: The camcorder will reduce a large amount of noise from the wind. Low-frequency sounds will alsobe reduced.[L Auto (Low) ]: The camcorder will reduce a small amount of noise from the wind. A small amount of low-frequency sounds will also be reduced.[j Off à]: The built-in microphone’s wind screen will be deactivated at all times.[¡ Audio Setup][1][Built-in Mic Wind Screen][H Auto (High)]
